PLC Planar Waveguide Optical Splitter (PLCSplitter) is an integrated waveguide optical power distribution device based on a quartz substrate. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals. Need optical splitter to realize.
It is one of the most important passive components in the optical fiber link. It is an optical fiber tandem device with multiple input ends and multiple output ends. It is especially suitable for connecting the central office and the central office in the passive optical network (EPON, GPON, BPON, etc.). Terminal equipment and realize the branch of the optical signal.
Classification and application of PLC splitter:
Rack type: installed in a 19-inch OLT cabinet; when the fiber branch enters the home, the installation equipment provided is a standard digital cabinet; when the ODN needs to be placed on the table.
ABS box type: installed in a 19-inch standard rack; when the fiber is branched into the home, the installation equipment provided is an optical cable transfer box; when the fiber is branched into the home, it is installed in the equipment specified by the customer.
Bare fiber type: ① Installed in various types of pigtail boxes. ② Installed in various types of test instruments and WDM systems.
Splitter type: ① installed in various types of optical distribution equipment. ②Installed in various types of optical test instruments.
Mini: ① installed in the optical cable connector box. ②Install in the module box. ③Install in the wiring box.
Plug-in type: This device is used for user access points that need to be split in the FTTX system. It mainly completes the end of the optical cable entering the cell or building. It has the functions of fiber fixing, stripping, fusion, jumper, branching, etc. Then enter the end user in the form of home fiber optic cable.
Tray type: suitable for integrated installation and use of various types of optical fiber splitters and wavelength division multiplexers.
Choose high-quality fiber optic connectors and adapters, with low insertion loss and high return loss;
Note: A single-layer tray can be configured with a maximum of 1 point and 16 adapter interfaces, and a double-layer tray can be configured with a maximum of 1 point and 32 adapter interfaces.