Optical fiber distribution cabinet installation method

Home / News / Industry News / Optical fiber distribution cabinet installation method

Optical fiber distribution cabinet installation method

1: Install the fiber optic distribution box on the rack
This step is very simple, we only need to install brackets on both sides of the optical fiber distribution box, and then fix the brackets to the designated position of the rack with screws. It should be noted that before installing the optical fiber distribution box, the installation direction of the distribution box should be determined according to the needs.
2: Introduce the optical cable into the optical fiber distribution box
After the optical fiber distribution box is fixed on the rack, the optical cable can be introduced into the distribution box through the cable inlet hole. At this time, we need to prepare a suitable grommet to help us introduce and fix the optical cable in the optical fiber distribution box. The optical cable here usually uses pre-terminated branch fiber jumpers or pigtails.
3: Distribute the optical cable in the optical fiber distribution box
Since the front panel of the optical fiber distribution box can be pulled out, the length of the optical cable trunk in the distribution box should be long enough, as shown in the figure below, in order to ensure that the optical cable will not To withstand excessive tension, the cable length between A and B should be at least 31 inches:
After fixing the fiber optic cable trunk, you can start working on each branch fiber optic cable. First, connect each pre-terminated fiber optic cable to the adapter panel separately to ensure that the ports correspond one by one; then fix the fiber optic adapter panel to the front panel of the distribution box with the bend radius control clip. During this process, be careful not to Exceeds the bend radius of individual cables.